|
|
PGHCONNECT > CUSTOMER SUPPORT > MACOS 7.5.X
Mac OS 7.5.X Dial-Up Networking Setup
|
Step 1. Start from your desktop and click on the Apple in the upper-left corner. Go down to Control Panels and select PPP.
|
|
Step 2. Enter your PGHConnect Username for name, your Password and your PGHConnect Local access number.
|
|
Step 3. Click on the PPP drop-down menu and select TCP/IP. (Note: The PPP Control Panel must be the active window in order to see the PPP menu.)
|
Step 4. In the TCP/IP window, make sure of the following 4 settings:
Connect via: is set to PPP.
Configure: is set to Using PPP Server.
Name Server Addr: is set to 216.151.83.45 and 216.151.83.55
Additional Search Domains can be blank or have PGHConnect.com in it.
Close out of this window and save your changes.
|
|
Step 5. Click on the PPP drop-down menu and select Modem. (Note: The PPP Control Panel must be the active window in order to see the PPP menu.)
|
Step 6. In the Modem window, make sure of the following 2 settings:
Connect via: The correct port must be selected. Typically this would be the Modem Port or Internal Port, depending upon the type of modem and how it is connected.
Modem: The correct type of modem needs to be selected. Most likely the one that is selected already is correct, but if you know for sure that you have a different modem, select one from the list that most closely matches yours.
Close out of this window and save your changes.
|
|
Step 7. On the PPP Control Panel, click the Options Button.
|
|
Step 8. On the Options window, make sure the Connection tab is selected. Check the box labels "Connect automatically when starting TCP/IP applications." Press OK.
Setup is now complete, just click connect to dial.
|
|
Please contact webmaster@pghconnect.com with questions or comments about this site.
Copyright © 2006 Pittsburgh Connect. All rights reserved.
|
